Figure 5 - Front Forks
Click Image
Figure 4 - Suspension & Exhaust
Click Image
Location of Decals
Click Image
Finished Model
Click Image
Finished Model
Click Image |
Britten V1000 Model - Parts before Assembly
Britten V1000 Scale Model - The Original Plug
There are 90 parts in the kit including the decal sheets, brass
screws, rubber tyres, plastic windscreen, etc. The perfectionist may wish
to solder the pewter parts together, but quality cyanoacrylate glue is
quite adequate for most modellers.
The screen may be attached using vinyl cement (modellng glue), but a
better solution may be to use PVC woodworking glue. Do not use superglue
as this will fog the screen.
Models are individually numbered on the box and the instruction booklet.
Mine is #000118.
If you have one of these models and would like to add information or
a link to this page, please email.
|
)
)
)
)
)
