Customer Review: This was purchased to replace an older Husky 18ga nailer. The husky (HD house brand) was all metal, heavy and not very ergonomic.
The Bostitch is made of composite plastic material and apparently some magnesium somewhere (the shroud maybe?). It is indeed light and handles nicely.
more info
Customer Review: I've never used a nailer before, so i didn't know what to expect, but this unit has worked great every nail so far. We are using 2" brads to nail baseboard and steps and have gone through maybe two or three hundred without a misfire. The nails are fully seated at 90 psi. Quality of the device... more info
Customer Review: This is my first nail gun. I've used some, many years ago, but never owned or used one with any regularity, so I don't have any info for the pros out there. My review is more for the homeowner, weekend warrior like me. I'm currently involved in a significant demolition and reconstruction project,... more info
Customer Review: This is a perfect unit for the homeowner. The compressor is amazingly lightweight and quiet. I can carry on a normal conversation with it running in the same room. Senco really thinks of everything by including the teflon tape and quick connects, etc. Granted, it was probably not geared for the... more info
Customer Review: As a few previous commenters stated, I also, had to remove the no-mar pad and file down the workpiece contact a small amount to get the brads to recess properly. I also discovered that tilting the nailgun slightly forward (toward the brad exit point also ensures a properly recessed brad. I have used... more info
Customer Review: Just started to use the 2 in 1 Bostitch. I would personally recommend to anybody that has a workshop or is a woodworking. It's lite weight plus can get into about any space to staple or put in a brad. Yes' it is small but packs enough power to set the stable or brad where you want it.
Customer Review: In addition to the other criticisms of this tool, the nose is assembled in such a way that clearing jams is a big pain. Three hex socket screws have to be removed and the nose safety, depth adjustment assembly, and nose safety/depth adjustment cover taken off before the nose plate can be removed to... more info
Customer Review: Good shopping experience.
Good information on the tool.
The tool came ready to work and work it did. It was precisely what we needed to finish the trimwork in our dining and living rooms.
Customer Review: This brad nailer works very well. The tip can mark your surface, so be careful. No problems with jamming. Feels and performs like an expensive nailer. Would recommend to anyone who needs a brad nailer.
Related
Sections
