1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
Use to pump out flooded basements, tanks, or boats
Made from durable cast iron steel
Connects to garden hose with 3/4-inch brass hose connections
Editorial Review:
Model PC4 has a high speed motor that delivers high-flow capacity that can be used to pump water from flooded basements, empty boats, drain stock tanks or water lawns and gardens. It can also be used to boost line pressure by as much as 50 PSI for power washing cars, sidewalks, and more. Will supply one to two sprinkler heads and 100 feet of garden hose. Easy-access handle for complete portability. A suction strainer is included with each pump. U.S.A. Flow (GPH): 1,450, Volts: 115, HP: 1/2, Max. Total Head (ft.): 100, Max. Suction Lift (ft.): 15, Suction Port (in.): 3/4, Discharge Port (in.): 3/4, Self-Priming: Yes, Pump Housing: Cast Iron, Impeller Shaft: Thermoplastic
The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It's made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.
Customer Reviews:
Avg. Customer Rating: 4.0 / 5.0
Wayne PC4 Pump - a fantastic pump Wayne 1/2 HP 115-Volt Transfer Water Pump, Cast Iron #PC4 This is a fantastic pump. For a half horsepower pump, it sure has a fantastic volume and speed capability. It's equipped with convenient brass fittings to make most hookups easier. A terrific value, especially considering the reasonable price. Wayne also has a fine selection of accessories for use with this pump. A real good buy!
Powerfull pump I use this pump to empty an above gound pool. I purchased a sturdy 15' hose for the intake and have had no problems. Like another reviewer noted, I had to buy an adapter for a few bucks to connect the filter onto the input hose end. I connect the output to my sprinkler system and get as much or more power then from the normal water supply. (after 30 minutes the sprinklers stopped, turned out their filters were plugged. Since then I've tied a screen around the intake filter to catch the small derbis and all... more info
Wayne 1/2hp Water Transfer Pump Cast Iron Very well made. Very powerful. Two garden hose connectors in box. Used pump to purge air from hot water heat zone. It easily forced water through and eliminated air from a 100' long zone that supplied a home's second storey. I used rigid 3/4" PVC for intake as pump's suction caused intake garden hose to collapse restricting pump's water flow. No state tax, Free shipping, and $30 less expensive than local rural stores. Arrived in four days.
Great product The pump is pumping as I write and while it is much louder than the sump pump under my house...it is transfering water from 4 feet under ground out to the street 100 feet away. Primes quickly once you fill the pump via a bolt hole in the top. I tried to draw the water up from my inground tank using a contractor grade hose, but the hose was getting squeezed almost shut from the pumps suction. I went to the hardware store and got 3/4" PVC and that works great...much better flow. Great product and it would... more info
Related
Sections
